-=OWNeR=-
John Cochran
-=YeAR / MaKE / MoDEL=-
94 Toyota mini
-=ENgINE=-
stock 22RE
-=ENgINE ACcESsORIeS=-
I had to move almost everything to clear the tires and suspension. I moved the clutch and master cylinder over quite a bit to clear the tire also. other than that its all stock with a lot of new parts.
-=DRiVE HaRDWaRE=-
the IRS is out of an 88 mazda rx7 turbo with Limited Slip, the frame was built out of 1.5 OD round tubing, and it has a stock toyota front clip, transition is at the firewall area, truck also has a rollcage for a little more structural integrity for the frame.
-=BoDYWoRK=-
Bodydropped to the doors. stock floor BD was raised about 1/2". bodywork done to it right now is the combo in the back, i am going to remove that and start clean and shave the whole truck.
-=BRaKeS & SuSPENsIoN=-
4 wheel disc brakes with a Wilwood adjustable proportioning valve for the rear, and stainless steel braided brake lines all the way around.
-=TyRES=-
The truck has some temporary 17inch chrome rims on it with 2 bald a tires and 2 almost bald tires.
-=INTeRIoR=-
2000 Honda Accord bucket seats with all metal floor for now and a rollcage in the way, heater and air conditioning are still functional as well.
-=STeReO=-
there is not stereo in it at this point and probably wont be for awhile, the transmission now resides where the stock stereo location is, so ill have to make something for that.
-=TRoPHyS=-
before the BD i got a hopping contest trophy against two cars with hydraulics, i was pretty excited about that.
-=AnY SPeCIaL THaNX=-
Jesse Cassota for helping me build this thing, and Zach Kays for the occasional hand, along with Miles Shinneman and his good ideas and motivation.
